#SMART PHONE FLASH TOOL MT6580 INSTALL#
#SMART PHONE FLASH TOOL MT6580 SERIAL#
#SMART PHONE FLASH TOOL MT6580 DRIVER#
#SMART PHONE FLASH TOOL MT6580 PATCH#

The bypass method is theorized to work the same way on other MediaTek chipsets, but someone needs to code a suitable payload first to disable the bootrom protection routine. The list of SoCs that are currently supported can be found below. Which MediaTek SoCs are supported by this method? If someone more experienced wishes to take this a step further, they can flash a modified partition backup to repair a botched IMEI, but this is beyond the scope of this article. After that, without disconnecting your phone, run SP Flash Tool in UART Connection mode.Īnd that’s it! The authentication routine is bypassed and you are now ready to flash/unbrick your phone.You should get “Protection disabled” at the end of the log. Extract the archive, execute the utility, and connect your phone in MediaTek Download mode.

#SMART PHONE FLASH TOOL MT6580 INSTALL#

Install the required dependencies using pip:.

Windows users should select “Add Python X.X to PATH” when prompted.

#SMART PHONE FLASH TOOL MT6580 SERIAL#

You should see a new serial device listed under Device Manager (Windows) or in the output of dmesg | grep usb (Linux).Īt this point, follow this simple, 5 step process to disable bootrom protection: When it comes to accessing the MediaTek download mode, you just need to turn off the target device, hold down the Volume Up button (Volume Down for Xiaomi phones), and plug your phone into your PC. In case you don’t want to touch your primary operating system, you can make use of FireISO – a bootable GNU/Linux ISO designed specifically for this purpose.

#SMART PHONE FLASH TOOL MT6580 PATCH#

Linux users, on the other hand, need to apply a specific patch to the kernel.

#SMART PHONE FLASH TOOL MT6580 DRIVER#

If you’re running Windows, you have to install a libusb-based filter driver to override the default driverset.

It’s important to note that the exploit payloads require a specially-tweaked USB driver for a successful interception. The method, which makes use of SoC-specific exploit payloads, intercepts the pre-flash queries made by SP Flash Tool and forcefully set the values of two crucial parameters (“Serial Link Authentication” and “Download Agent Authentication“) as false in order to continue the flashing process without any kind of authorization. Based on a boot ROM-exploit originally discovered by XDA Senior Member xyz`, developers Dinolek and k4y0z have come up with a generic bypass method, which is compatible with a wide variety of MediaTek-powered devices that would otherwise require authentication while flashing. Well, XDA’s fantastic developer community has once again come to the rescue. Because of this practice, firmware flashing via download mode can only be performed by a signed “Download Agent” program that has been authorized by the corresponding OEM, essentially meaning that you can’t flash or unbrick your own smartphone unless you have permission from the device maker to do so.

Since the low-level download mode effectively has full control over the device’s storage, many OEMs including Xiaomi and Realme have started obfuscating the flashing process. A MediaTek-made proprietary program called “SP Flash Tool” can utilize this interface to force flash the system software on a device. It is strictly intended for OEM servicing and can be used to unbrick a device, just like Qualcomm’s Emergency Download Mode (EDL). Devices with MediaTek chipsets have a BROM (boot read-only memory), which typically loads the preloader executable and subsequently boots the Android system, but also houses an alternative boot mode known as Download mode.

Smart phone flash tool mt6580